A fully automatic packing machine, capable in wrapping 1, 2 or 3 rolls in one plastic bale.

Brand : Colsman & Kirschner, model FC

Building year : 2002

Condition : used less than 1 shift per weak and perfectly maintained

Width : roll of max. 30 cm diameter and min. 120 cm / max 260 cm

Capacity in case of 3 rolls in a bale : 5 per min !!!

Following is the material handling flow :

1.     Tilting the container with the rolls on a transportation belt

2.     Rolls are transported to the packing unit

3.     The packaging material is dispensed from a magazine, capable of holding 3 rolls of different width. It goes vertically downwards into the lower part of the machine and the packing table

4.     The rolls are pushed against the curtain of packaging material. During this process the packaging material almost fully envelops the roll

5.     There is a stationary welding bar between the receiver and the packaging table. The welding is always at the center of the rolls. The package will be dependably and tightly enveloped.

6.     The rolls are then moved by an automated transport system into the appropriate position band the side ends are ultrasound welded

7.     The packed rolls get an self adhesive label with barcode on the outside, controlled by a P/C

8.     Finally the packed and labeled rolls are moved out of the machine and are lifted to be stored in one of the two dedicated containers

The machine can be operated by one person, who has still free time for administrations or other jobs, while the machine is working = lower labor cost.

There is very little loss of packing material = less material expenses

Attractive consumer package for the rolls

Visiting adres : Appointment at our Office

Price not dismantled : 135.000 Eur net Ex Works;

We are open to any serious counteroffer.

Good working conditions.

See Pictures below...